A great value for money 50/75mm 6 point harness popular with oval track and rally kart drivers.
The simple and robust lever latch release buckle works well, even in very dirty environments. The harness features a "V" Crutch strap, steel adjusters and snap hook fixings as standard all round.
A variety of attachment points are available on request – please see the attached specification sheet detailing the options.
As part of your pre-race checks, TRS recommend that you check the latch for a positive release prior to using the harness.
Details of the key features of this harness are shown below. If need help deciding which harness is for you, please have a look at our TRS Harness Comparison Table.
- 6 snap hook fixing points
- SFI approved upon request
- 50mm (2") shoulder straps (upgrade to 75mm (3") straps using the dropdown box above)
- 50mm (2") lap straps (upgrade to 75mm (3") straps using the dropdown box above)
- 50mm (2") crutch straps
- Standard colours are Red, Blue and Black. Yellow, Green, Grey/Silver, Orange, Pink and Miami Blue are special order (see dropdown above)
- Lever latch release mechanism
- Pull down to tighten lap
- 7/16" UNF eye bolts available, either the standard or long version (see dropdown above)
- Instructions included
- Made in England
Shoulder Straps
- Standard length shoulder straps are approximately 150cm from the adjuster to the fixing point
- Short shoulder version straps are approximately 90cm from the adjuster to the fixing point
- The adjustment range of the lower shoulder strap is between 10cm and 40cm
- If you plan to fix the shoulder straps in place by wrapping them around a roll bar we would recommend going with the standard length shoulder straps as you will need approximately 50cm of excess webbing to wrap around securely
- The fixings at the end of the shoulder straps are not sewn on, and can easily be removed if you plan to wrap the shoulder straps around a roll bar
Options
Free Keyring With Every TRS Order!
Exclusive offer for Carnoisseur customers! We are now giving away a free TRS keyring worth £12.95 with every order for TRS harnesses!
This superb keyring from TRS is made from the same high quality webbing as their harnesses, and is available in the same range of colours too: Black, Red, Blue, Yellow, Green, Grey/Silver, Orange, Pink, and Miami Blue. Made in the UK at the TRS factory, the keyring is 10cm in length, and is a great looking, practical accessory for all motorsport enthusiasts.
Select which colour TRS keyring you would like to add to your order using the dropdown menu above.
Please note that just one keyring is provided by order.
Webbing Colour
TRS Harnesses are available in 9 different webbing colours: Red, Blue, Black, Yellow, Green, Grey/Silver, Orange, Pink, and Miami Blue.
Red, Blue, and Black harnesses are the most common colours, so harnesses in those colours are usually in stock, if you need your harnesses in a hurry.
Thread Colour
As standard, TRS Harnesses are stitched using the same colour thread as the webbing, but contrasting colours are also available. There are 9 different thread colours available: Red, Blue, Black, Yellow, Green, Grey/Silver, Orange, Pink, and Miami Blue.
Adjusters
You can upgrade the harnesses to the Superlite version. As standard TRS harnesses use steel anti-creep adjusters. Also available are premium aluminium alloy adjusters, which in addition to being lightweight, offer a smoother and faster adjustment. The Superlite harnesses use these lightweight aluminium adjusters on the shoulder straps.
They are highly recommended for vehicles being shared between multiple drivers, and in general we always recommend upgrading to the aluminium adjusters due to their premium look and feel.
Standard Steel Adjusters
50mm (2") steel adjusters
75mm (3") steel adjusters
Premium Aluminium Adjusters
50mm (2") aluminium adjusters
75mm (3") aluminium adjusters
Short Shoulder Straps
A short shoulder version is available, which are approximately 90cm from the adjuster to the fixing point, compared to 150cm as standard.
Extras
TRS Shoulder Pads
TRS Webbing Cutter
With these harnesses we offer some optional extras for your comfort and safety, which you can select using the dropdown boxes above.
A pair of TRS Shoulder Pads are available in three colours: black, red, and blue. They simply attach with velcro around the shoulder strap area of the harness, for added comfort for the wearer. They will be provided in the appropriate size for the harness you choose.
Also available is a TRS Webbing Cutter, for use in case of emergencies. This is a knife for a driver, passenger or marshal to cut through harnesses and webbing in the event of an accident, to quickly release the wearer and avoid being trapped in the car. The cutter meets the MSA Blue Book requirement which states "Belt cutter(s) must be carried on board at all times", so it's a must-have when racing.
CLICK HERE to download the fitting instructions for this TRS Harness.
This TRS Harness can be fitted by a competent enthusiast or at a professional workshop.
Fitting Centre Locator
01582 787377
