Eibach Pro Street S Coilover Kit to fit Seat Leon (1M1) 1.4 16V, 1.6, 1.6 16V, 1.8 20V, 1.8 20V T, 1.8 T Cupra R,1.9 SDI, 1.9 TDI (from Nov 1999 to Jun 2006)

£1,235.00

Part Number: PSS65-85-001-01-22
Quick Code: P392914

View delivery information
Click here to ask a question

Eibach

Eibach Pro Street S Coilovers

Eibach Pro Street S Coilover Kits feature adjustable ride height with fixed rate damping. From their extensive experience gained within Formula One, WRC and the German Touring Car Championship, Eibach have produced a superb range of coilover suspension kits that are specifically designed for each application and suited perfectly for performance driving on the road.

Pro Street S Coilover Kits have fixed rate damping that has been optimised for fast road driving - good ride quality at low speeds, ultra stable at high speed, and suitable for everyday use. The stainless steel coilover units give excellent corrosion resistance and long lasting durability against the toughest driving conditions.

  • Stainless steel coilover housings for optimum function and superb, long lasting looks
  • Unrivalled corrosion resistance
  • Easy height adjustment for exact height adjustment and corner weight settings
  • Designed, developed and tested for each application
  • Supplied with the necessary bump stops
  • Excellent suspension travel retained - a must for decent handling on poor roads
  • Includes 1 year warranty

Please note that coilover height adjustable units are supplied front and rear where possible. Where rear suspension design does not allow for coilovers, alternative height adjustable or lowered units are supplied.

Tailor made for your car, this Eibach Pro Street S Coilover Kits need to be fitted at a professional workshop. Most of our fitting centres will be able to offer a fitting service for this product - please contact your local fitting centre to find out more.


Check Your VIN Plate

Before ordering, it's important to check your vehicle does not exceed the load rating of this product. The easiest way to do this is by checking your VIN plate, usually found in the engine bay, on the underside of the bonnet, or on the driver's side door pillar.

On the VIN plate will be a list of weights, in kilograms. The last two values are the front and rear axle load ratings of your vehicle respectively. For this product, the front axle load rating must be no more than 1030kg, and the rear axle load rating must be no more than 1025kg.

For more details, click here to read our guide on checking load ratings on your vehicle's VIN plate.

Delivery: Estimated between Tue 3rd - Fri 6th Dec 2024

Deliveries are made Monday to Friday and exclude weekends and public holidays.

We have an order cut-off time of 1PM on the days that we are open. Our estimated delivery date takes this into account.

If it is available, we will provide tracking information by email.

Select Your Location:
Postage & Packaging:

UK Mainland excludes all islands and postcode areas IV, KW, PH, FK17-21, PA21-78

If you are ordering multiple items your total postage charge will be reduced. Please check your basket for the total cost.

  • For vehicles with a front axle load rating of up to 1030kg
  • For vehicles with a rear axle load rating of up to 1025kg
  • Front lowering: 35-65mm
  • Rear lowering: 35-65mm
  • Without levelling control.
  • Except vehicles with 4WD.
  • Front axle height adjustable by threaded strut, rear axle by height adjustable unit.
  • In order to ensure sufficient clearance it may be necessary to use wheel spacers if the car is equipped with original wheel sizes.
  • When the car is lowered more than 40 mm in combination with a drive shaft diameter more than 42 mm, the original equiped front stabilizer bar has to be replaced by the EIBACH Anti-Roll-Kit part.-no. E40-85-005-01-11.
  • In some cases additional OE-Parts for the installation of the suspension componends are required. Therefore please take a look at the corresponding technical documents which are available on our website.
  • If replacement required: You will find the components in the Components Certificate at the point "Amendment of the vehicle documents". The Components Certificate can be downloaded on: www.eibach.com - click on British flag - Online Catalog / Product & Components Certificate Search (RED BUTTON)
Carnoisseur Staff

Trading For Over 40 Years

  • Family owned and operated since 1979
  • Just ask our customers - we are rated EXCELLENT on Trustpilot
  • Safe, secure and easy ordering, online or by calling 01582 787377



Carnoisseur Price Match Promise

The Very Best Prices




Fitting Centre

Fitting Service