Cobra Magnum 4 Point FIA/Road Harness

These are brand new FIA approved harnesses with 2024 homologation, and are labelled accordingly.

A basic 75mm (3") lap and shoulder, FIA approved 8854/98 saloon harness ideally suited for a saloon or GT car.

Snap hook fixings are fitted all round. The shoulder straps can be wrapped around the roll cage if required.

The lightweight 140 gram quick release buckle is of composite construction and is attached to the right-hand lap strap on 4 point harnesses. Innovative features such as a securing tab for intercom cables on the shoulder strap and thumb loops on lower shoulder straps were all pioneered by Cobra and are standard on all of their competition harnesses.

A variety of attachment points are available on request – please see the attached spec sheet detailing the options.

Key Features

• 4 snap hook fixing points
• FIA Homologation 8854/98
• SFI Homologation labelling on request
• Suits saloon/GT cars, with short shoulder version also available for other cars (see dropdown above)
• 75mm (3") shoulder straps
• 75mm (3") lap straps
• Compatible with HANS/FHR devices, however if you intend to only use the harness with a HANS/FHR device we recommend using a 'HANS Only' version with 2" shoulder straps
• Standard colours are Red, Blue and Black. Yellow, Green, Grey/Silver, Orange, Pink and Miami Blue are special order (see dropdown above)
• Wrap round shoulder fixing facility
• Rotary quick release buckle
• Securing tab for intercom cables on the shoulder strap
• Thumb loop on lower shoulder straps
• 7/16" UNF eye bolts and instructions included
• Made in England

Options

• Adjuster Type - Steel as standard, or choose to upgrade to premium aluminium adjusters on the shoulders (superlite), or shoulders and laps (ultralite)
• Colour - 9 colours are available, check the images to see the different options
• Shoulder Pads - For added comfort, shoulder pads are available in red, blue, or black
• Webbing Cutter - For use in an emergency, keeping a TRS Webbing Cutter in your vehicle can give you extra peace of mind
• Short Shoulder Version - Suitable for smaller cars with shoulder strap fixings directly behind the front seats. Please note that we don't recommend this option if you plan to wrap the shoulder straps around a roll bar.

Adjusters

You can upgrade the harnesses to the Superlite or Ultralite versions. As standard TRS harnesses use steel anti-creep adjusters. Also available are premium aluminium alloy adjusters, which in addition to being lightweight, offer a smoother and faster adjustment. The Superlite harnesses use these lightweight aluminium adjusters on the shoulder straps, and the Ultralite harnesses use them on both the shoulder and lap straps.

They are highly recommended for vehicles being shared between multiple drivers, and in general we always recommend upgrading to the aluminium adjusters due to their premium look and feel.

Standard Steel Adjusters

50mm (2") steel adjusters

75mm (3") steel adjusters

Premium Aluminium Adjusters

50mm (2") aluminium adjusters

75mm (3") aluminium adjusters

Shoulder Straps

• Standard length shoulder straps are approximately 150cm from the adjuster to the fixing point
• Short shoulder version straps are approximately 90cm from the adjuster to the fixing point
• The adjustment range of the lower shoulder strap is between 10cm and 40cm
• If you plan to fix the shoulder straps in place by wrapping them around a roll bar we would recommend going with the standard length shoulder straps as you will need approximately 50cm of excess webbing to wrap around securely
• The fixings at the end of the shoulder straps are not sewn on, and can easily be removed if you plan to wrap the shoulder straps around a roll bar

Bespoke Harness Options

Do you require bespoke options? CLICK HERE to download our Harness Spec Sheet. You can complete this and email it to us for a quote, or just give us a call.

Extras

Cobra Shoulder Pads

TRS Webbing Cutter

With these harnesses we offer some optional extras for your comfort and safety, which you can select using the dropdown boxes above.

A pair of Cobra Shoulder Pads are available in three colours: black, red, and blue. They simply attach with velcro around the shoulder strap area of the harness, for added comfort for the wearer. They will be provided in the appropriate size for the harness you choose.

Also available is a TRS Webbing Cutter, for use in case of emergencies. This is a knife for a driver, passenger or marshal to cut through harnesses and webbing in the event of an accident, to quickly release the wearer and avoid being trapped in the car. The cutter meets the MSA Blue Book requirement which states "Belt cutter(s) must be carried on board at all times", so it's a must-have when racing.

CLICK HERE to download the fitting instructions for this TRS Harness.

This Cobra Harness can be fitted by a competent enthusiast or at a professional workshop. Most of our fitting centres will be able to offer a fitting service for this product - please contact your local fitting centre to find out more.