Cobra Le Mans Diagram
Mini (Classic) Mini Fitting Kit Diagram
Please note the height of the seat shown is from the ground to the highest point of the seat, when the seat base is flat on the ground as shown in the diagram. All measurements are in millimetres.
This package has been specifically tried and tested for the Classic Mini. Significant research and development has been put into creating a bespoke fitting kit for this vehicle, so you can be guaranteed that the seats fit perfectly and safely in your Mini. It's almost as if these luxury sports seats were fitted in the Mini (Classic) factory as standard.
- Tubular steel frame with base suspension diaphragm
- Dual sided infinite recline facility
- Tested to ECE R17/FMVSS 207 and ADR 3
- Fabric, Vinyl and Leather options available (see dropdowns above)
- Choice of colours (see dropdowns above)
- Signature Range options also available - choice of stitching colours, Cobra logo colour and additional logos - contact us for details
- Available in Dinamica - a suede-like luxurious and soft microfibre material
What's Included In This Package?
- 2x Cobra Le Mans seats
- 2x Mini (Classic) Mini Fitting Kit - tailored to fit this specific car and seat
Please note that the fitting kit supplied includes a vehicle specific frame, seat belt bracket, and low profile runners. The installation of this seat package may, in some instances, cause warning lights to be shown on your dashboard. This can normally be fixed using resistors, although it may be necessary to have some warning lights professionally "coded-out".
Options
Cobra Classic Mini Tailored Rear Seat Cover
Add a tailored rear seat cover in matching fabric with beautiful Cobra embroidery, stitching and piping.
Cobra Classic Mini Door Card Set
Upholstered replacement door and rear quarter panel set, made in the Cobra factory based in the UK in Telford. These panels are supplied as a complete set of four. A pair of for the front doors and a pair for the rear quarter panels. They are specifically manufactured for Classic Minis with wind up windows (Mk 3 Mini onwards) and are ideal to match or complement the style of your Cobra Seats.
They are available in several trim combinations, which you can choose using the dropdown boxes above. For example, black panels are available in plain vinyl (with simply black stitching), with coloured piping line to the centres or with black corduroy or basketweave lower sections. Also available in black leather. Coloured vinyl or leather with matching or contrasting piping is also an option.
Cobra Classic Mini Parcel Shelf
Genuine Cobra Rear Parcel Shelf boards supplied fully upholstered, and hand made in Telford at the Cobra factory.
They are tailor made for all Classic Minis with wind up windows (Mk 3 Mini onwards). Available in any colour of vinyl or leather using the drop downs above. Check our material gallery for available colours and we will call you after you have placed your order to confirm your colour choice.
Classic Mini Carpet Set
Carrelli Classic Mini Carpet Sets are manufactured in deep pile (6mm) tufted automotive grade carpet for long life and authentic appearance.
All visible, cut edges are bound with matching leathercloth and they come with non-slip heel pads to both sides. High grade hessian is used for the backing and this set for the Classic Mini comes with a section of carpet that covers the entire crossmember that runs from side to side of the vehicle. The sets are produced using metal cutting dies to ensure every section is perfectly shaped and will fit without trimming or modification.
Classic Mini Underfelt Kit
Carrelli Sound Deadening Underfelt Kit. Manufactured from black felt material that is acoustically excellent at reducing road noise and heat.
They are manufactured using metal tooling dies to ensure a perfect fit. Ideal for replacing original underfelt especially when undertaking a complete interior renovation or upgrade.
Classic Mini Premium Tailored Mat Set
Set of 4 premium quality tailored Autostyle mats for Classic Mini.
Not to be confused with cheap inferior quality mats, the mats are heavyweight and will not curl or move around underfoot. They are made from high quality carpet for a premium finish. They use dense automotive quality carpet (280,450 tufts per square meter). The weight of the material is 2.1kg per square metre. The same mats are supplied to the world's leading premium car manufacturers, and are therefore made to the highest, original equipment specification levels. Supplied with heel pad to driver's side mat.
Available mat colours are: Black, Royal Blue, Beige, Red, Grey, Anthracite, Dark Red, and Bottle Green. Available binding colours are: Black, Grey, Brown, Beige, Red, Bottle Green, White, Navy Blue, Silver, Royal Blue, Yellow, Dark Red, Purple, Orange, Magnolia, Pink, Biscuit, and Oatmeal. We will contact you after you have placed your order to confirm your colour choices.
Embossed Logo
Embossed logo on leather
Embossed logo on nappa leather
An embossed logo is available as an optional extra, replacing the standard embroidered Cobra logo. This is a more subtle option, pressed into the material with a custom made stamp. This option is only available on leathers.
Seat Base Side Bolster Height
Example Jensen base with lower side bolsters
Example seat base with standard side bolsters
These seats are optionally available with lower side bolsters on the seat base - known as a Jensen base.
Armrests
Folding armrests are optionally available for these seats. These armrests are bolted onto each side of the seat and can fold away when getting in and out of the seat. They are often used in vans and motorhomes.
Heated Seats
Example of the heater switch mounting
Components included with the seat heater
Seat heater wiring diagram
As an optional extra, seat heaters can be installed. They are pre-fitted in the seat, and come with everything you need to install them in your vehicle - wiring, a relay, switch, and drilling template. Installation is easy, and just involves connecting to a 12V supply and finding a location to mount the switch (the example image above shows the switch mounted in original equipment interior plastic). An instruction manual is provided and can be viewed online here. Please note that it is not designed to integrate with the original equipment wiring.
This Cobra Le Mans Seat Package can be fitted by a competent enthusiast or at a professional workshop.
Fitting Centre Locator
01582 787377
