Please note the height of the seat shown is from the ground to the highest point of the seat, when the seat base is flat on the ground as shown in the diagram. All measurements are in millimetres.
- Tubular steel frame with base suspension diaphragm
- 4 point harness facility
- Dual sided infinite recline facility
- Tested to ECE R17/FMVSS 207 and ADR 3
- Breathable & cooling spacer fabric
- Supplied with Anthracite Suede Tec Wear Patches as standard
- Fabric, Vinyl, Leather and Alcantara options available (see dropdowns above)
- Choice of colours (see dropdowns above)
- Signature Range options also available - choice of stitching colours, Cobra logo colour and additional logos - contact us for details
- Available in Dinamica - a suede-like luxurious and soft microfibre material
- Price is for a single seat - please select quantity required
- This seat is fitted using subframes - view the Cobra subframes listing to see if subframes are available for your vehicle
Please note - when choosing the heated seat option, the kit includes a circuit with a switch and will just need connecting to a 12V supply. It is not designed to integrate with the original equipment wiring.
Weight: 13.5kg
Cobra premium, low profile seat runners can be added to your order using the dropdown menu above.
Options
Piping
Classic seat without piping
Roadster seat with piping
Piping is available on this seat, as an optional extra. Piping is a small strip of extra vinyl material sewn along the edge seams of the seat. Usually this is the same colour as the vinyl on the rest of the seat, but can also be made in a contrasting colour for an extra charge.
Seat Base Side Bolster Height
Example Jensen base with lower side bolsters
Example seat base with standard side bolsters
These seats are optionally available with lower side bolsters on the seat base - known as a Jensen base.
Runners
These seats can be base mounted, which means they have threaded holes for mounting on the bottom of the seat - 2 on each side. Often the seat will be bolted onto seat runners to allow the seat to be adjusted backwards and forwards. Cobra's Premium Low Profile Seat Runners are available to select with the dropdown box above. They include all the mounting hardware necessary.
Embossed Logo
Embossed logo on leather
Embossed logo on nappa leather
An embossed logo is available as an optional extra, replacing the standard embroidered Cobra logo. This is a more subtle option, pressed into the material with a custom made stamp. This option is only available on leathers.
Heated Seats
Example of the heater switch mounting
Components included with the seat heater
Seat heater wiring diagram
As an optional extra, seat heaters can be installed. They are pre-fitted in the seat, and come with everything you need to install them in your vehicle - wiring, a relay, switch, and drilling template. Installation is easy, and just involves connecting to a 12V supply and finding a location to mount the switch (the example image above shows the switch mounted in original equipment interior plastic). An instruction manual is provided and can be viewed online here. Please note that it is not designed to integrate with the original equipment wiring.
This Cobra Daytona Seat can be fitted by a competent enthusiast or at a professional workshop.
Fitting Centre Locator
01582 787377
